Pharmaceutical Industry

    SINE México offers industrial maintenance, civil works, and specialized coating services for the pharmaceutical industry, ensuring compliance with cGMP, FDA, and ISO standards for cleanrooms. We maximize safety and contamination control through cementitious urethane floors, sanitary-grade epoxies, and high-purity orbital welding.

    Cleanrooms, cGMP, and contamination control.

    What is Infrastructure for the Pharmaceutical Industry?

    Pharmaceutical industry infrastructure comprises physical facilities, critical support systems, and surface coatings designed under the principle of absolute contamination control. Unlike general manufacturing, pharmaceutical environments require strict sanitary design that complies with cGMP (Current Good Manufacturing Practices) and the guidelines of COFEPRIS and the FDA.

    Key components of this infrastructure served by SINE México include:

    • Cleanrooms: Areas with controlled atmosphere in terms of particle concentration, humidity, temperature, and differential pressure, classified according to the standard ISO 14644.
    • Sanitary Floors and Coatings: Monolithic, seamless, non-porous surfaces, resistant to chemical attack from sanitizing agents and with antimicrobial additives.
    • Process Piping Systems (High Purity Piping): Distribution networks for Water for Injection (WFI), Purified Water (PW), and pure steam, manufactured from 316L stainless steel with orbital welding.
    • Pharmaceutical Grade HVAC Systems: Air handling units equipped with HEPA (99.97% efficiency) and ULPA filtration stages to prevent cross-contamination.
    • Classified Electrical Systems: Explosion-proof and intrinsically safe electrical installations for areas handling reactive powders or flammable solvents.

    When is facility maintenance and adaptation needed?

    A maintenance or plant manager should schedule SINE México's intervention upon detecting the following operational signs:

    1. Coating detachment: Presence of cracks, blistering, or peeling of epoxy paint on floors or walls, which generates suspended particles.
    2. Cracks in control joints: Open expansion joints or those with degraded sealants that accumulate moisture, promoting the growth of fungi and bacteria.
    3. Non-conformities in audits: Observations by COFEPRIS, FDA, or contract manufacturing clients due to non-sanitary finishes, dust accumulation in corners, or lack of sanitary coves.
    4. Corrosion in utility piping: Presence of corrosion (rouging) in stainless steel lines or leaks in purified water systems.
    5. Loss of differential pressure: Failures in the sealing of access points, ceilings, or pipe penetrations that prevent maintaining pressure gradients between cleanrooms and common areas.

    Problems SINE México solves

    • Risk of cross-contamination: We eliminate sources of physical, chemical, and biological contamination through the application of monolithic sanitary-grade coatings.
    • Production shutdowns due to microbiological contamination: We sanitize and recondition critical areas using fast-curing materials to reactivate lines in minimal time.
    • Regulatory penalties and closures: We ensure your plant passes audits of NOM-059-SSA1 and international standards.
    • Degradation by chemical agents: We apply novolac epoxy resin systems and cementitious urethanes resistant to peracetic acid, hydrogen peroxide, and isopropyl alcohol used in daily cleaning.
    • Explosion risks (Powders/Solvents): We route and install electrical systems under intrinsic safety specifications and physical grounds to dissipate static.

    Benefits for your plant

    • 100% Regulatory Compliance: Total alignment with COFEPRIS, FDA, ISO, and applicable NOMs.
    • Waste Reduction: Minimization of product batches rejected due to particle or microorganism contamination.
    • Extended Surface Lifespan: Increased lifespan of floors and coatings by up to 10 years under heavy-duty use conditions.
    • Guaranteed Return on Investment (ROI): Reduction of recurring corrective maintenance costs and prevention of multi-million dollar regulatory fines.
    • Safe Work Environment: Reduction of slip risks through non-slip sanitary textures and elimination of explosive atmospheres.

    Types of solutions and systems available

    System / SolutionRecommended ThicknessChemical ResistanceCuring TimeIdeal Application
    Cementitious Urethane (SikaFloor / FasTop)4.0 to 6.0 mmExcellent (Acids/Alkalis)12 - 24 hoursWashing areas, wet production, thermal shock
    100% Solids Self-Leveling Epoxy2.0 to 3.0 mmHigh (Sanitizers/Solvents)24 - 48 hoursCleanrooms, primary packaging, laboratories
    Water-based Epoxy Paint (Low odor/Zero VOC)10 to 15 milsModerate12 - 24 hoursRaw material warehouses, light traffic aisles
    High-Strength Epoxy Mortar5.0 to 8.0 mmHigh (Heavy traffic)24 hoursForklift aisles, loading and unloading areas
    Wall Coatings (Glass Flake / FRP)VariableHigh12 - 24 hoursWalls of weighing rooms and equipment washing areas

    Cutting-edge materials and technologies

    At SINE México, we don't improvise. We select materials from leading global brands under strict chemical engineering criteria:

    • Sika (Sikafloor PurCem / Sikagard): Polyurethane-cement systems and hygienic wall coatings with silver ion technology that inhibits bacterial growth.
    • Sherwin-Williams (FasTop / Resuflor): High-density epoxy and urethane resins, ideal for resisting traffic from hydraulic pallet jacks and forklifts with polyurethane wheels.
    • Sherwin-Williams (Macropoxy): High-performance anti-corrosion coatings for metal structures exposed to humid or corrosive environments.
    • Elastic Joint Systems (SikaFlex PRO-3): High-elasticity and chemical-resistant polyurethane sealants, specifically designed for control joints in sanitary floors.

    Applicable Regulations and Standards

    Our projects are executed under strict compliance with a national and international regulatory framework:

    • NOM-059-SSA1-2015: Good manufacturing practices for medicines.
    • ISO 14644 (Parts 1 to 4): Standards for cleanroom classification and design.
    • FDA 21 CFR Part 211: CGMP regulations for finished pharmaceutical products.
    • NOM-001-SEDE-2012: Electrical installations (utilization), focused on classified areas.
    • NOM-026-STPS-2008: Colors and signs for hygiene and safety, and identification of fluids conveyed in pipes.
    • ASME BPE (Bioprocess Equipment): Standard for the design of bioprocessing equipment and piping.

    Our work process (SINE)

    1. On-site technical diagnosis: We evaluate substrate conditions (moisture, concrete compressive strength with a sclerometer) and review plant blueprints.
    2. Detailed engineering and proposal: We design the optimal solution specifying thicknesses, resin chemistries, piping routes, and electrical classifications.
    3. Surface preparation (Critical Step): We perform mechanical grinding using scarification, shot blasting, or diamond polishing to achieve the correct anchor profile (CSP 3 to 5 depending on the system) and ensure chemical adhesion.
    4. Specialized application: We install the systems using our own certified personnel, under controlled temperature and humidity conditions to prevent curing failures.
    5. Quality control and testing: We perform adhesion tests (pull-off test), wet/dry thickness measurements, visual inspection of welds, and electrical continuity tests on dissipative floors.
    6. Delivery and technical dossier: We deliver the area clean, released, and accompanied by its quality dossier which includes technical data sheets, safety data sheets, material quality certificates, and written warranty certificates.

    Common errors when hiring / installing (And how SINE avoids them)

    • Omitting concrete moisture testing: Applying epoxies on slabs with more than 4% moisture causes blistering due to osmotic pressure. At SINE, we measure moisture with digital hygrometers before any application and install vapor barriers if necessary.
    • Poor surface preparation: Cleaning only with acid or solvents does not uniformly open the concrete's pores. We perform mandatory mechanical preparation with integrated dust collectors to keep the area clean.
    • Use of materials with high levels of VOCs (Volatile Organic Compounds): Solvents in common paints contaminate air systems and the product. We exclusively use 100% solids or water-based materials with zero VOC emissions, ideal for active plants.
    • Failure to anticipate expansion joints: Covering expansion joints with rigid epoxy causes the floor to crack with the first structural movement. SINE seals joints with sanitary-grade elastomeric polyurethanes.

    Good practices and surface maintenance

    To maximize the lifespan of your sanitary floors and coatings, we recommend:

    • Cleaning with appropriate equipment: Use soft fiber pads on floor scrubbers; avoid wire brushes or black abrasive pads that scratch the surface.
    • Correct chemical dosage: Respect the recommended dilutions of sanitizing agents to prevent discoloration or premature chemical attack.
    • Preventive wheel maintenance: Ensure that forklifts and pallet jacks use clean polyurethane or nylon wheels, free of embedded metal shavings.
    • Semi-annual joint inspection: Check the condition of the elastic sealant in joints to replace it before it allows water filtration into the subsoil.

    Factors determining cost

    The budget for a pharmaceutical maintenance or adaptation project varies according to:

    • Current substrate condition: Degree of oil contamination, level of cracking, or need for prior concrete leveling.
    • Thickness and type of system: High-build (6 mm) urethane cementitious systems have a higher material cost than a 2 mm self-leveling system.
    • Logistics and work windows: Work performed during night hours, weekends, or continuous 24-hour plant shutdowns.
    • Total square footage: The larger the area volume, the more we optimize mobilization and application costs per square meter.
    • Containment requirements: Need to erect physical dust barriers (temporary drywall walls or confined plastics) to avoid stopping adjacent areas.

    Typical execution times

    • Areas from 100 to 500 m²: 3 to 5 business days, including mechanical preparation, primer application, system body, seal, and curing for pedestrian traffic.
    • Areas from 500 to 1500 m²: 5 to 8 execution days coordinating double shifts.
    • Minor modifications (Sanitary coves, rapid patching): Execution on weekends (24 to 48 hours) with ultra-fast curing systems (MMA or polyaspartics).

    SINE Mexico Warranty

    All SINE México projects include written warranty of up to 5 years (according to the specified system), directly backed by the material manufacturers (Sika, Sherwin-Williams). Our commitment includes post-sales technical support, free annual inspection visits, and immediate response to any operational eventuality.


    Frequently Asked Questions

    What type of flooring do you recommend for a pharmaceutical primary packaging area?

    We recommend 4 to 6 mm thick cementitious urethane systems or 100% solids self-leveling epoxies (such as SikaFloor or Sherwin-Williams FasTop), integrating 2-inch cove bases. These systems resist aggressive daily chemical sanitizations, pedestrian and forklift traffic, and have no joints where microorganisms can proliferate.

    How do you ensure that welding work does not contaminate our process lines?

    We use TIG welding with an automated orbital process and high-purity argon gas purge (99.999%) to prevent internal oxidation (false flow). All our welding personnel are certified under ASME Section IX, and we provide videoboroscopy reports to validate the penetration and internal sanitary finish of the piping.

    What regulations do your materials and processes comply with for cleanrooms?

    Our processes and materials are aligned with NOM-059-SSA1-2015 (Good Manufacturing Practices for Medicines), FDA guidelines (21 CFR Part 211), COFEPRIS regulations, and ISO 14644 standard for cleanroom classification, ensuring that applied materials are VOC-free and do not release particles.

    Do you perform work during scheduled plant shutdowns on weekends or holidays?

    Yes, at SINE México we coordinate work crews 24 hours a day, 7 days a week, including holidays and night shifts. We rigorously adapt to your preventive maintenance windows to minimize impact on the supply chain and avoid unplanned production stoppages.


    Request your quote

    Optimize the safety and regulatory compliance of your pharmaceutical plant with the experts from SINE México. We offer free diagnostic and survey technical visits in Torreón, Gómez Palacio, Lerdo, Saltillo, Ramos Arizpe, Piedras Negras, and surrounding areas.

    Do you work in pharmaceutical industry?

    Let's talk about your project. We know the standards and timelines of your industry.

    Request a Quote