Hospitals

    SINE México offers specialized maintenance for hospitals, clinics, and laboratories, applying epoxy floors, cementitious urethanes, and sanitary-grade coatings. We guarantee total asepsis in operating rooms, corridors, and critical areas under COFEPRIS and NOM-016-SSA3-2012 regulations, minimizing downtime with fast-curing systems.

    Critical areas, operating rooms, and hospital corridors.

    What is Sanitary Grade Hospital Maintenance?

    Industrial maintenance and infrastructure adaptation for the healthcare sector includes a set of technical, engineering, and civil works services aimed at preserving, adapting, and certifying critical and common areas of hospitals, clinics, laboratories, and pharmaceutical plants. Unlike commercial maintenance, the hospital environment demands absolute control of cross-contamination, rigorous asepsis, electrical safety, and extreme chemical resistance.

    This specialized service from SINE México includes:

    • Polymeric floors and coatings: Epoxy, urethane, and polyaspartic systems with conductive (ESD) and antimicrobial properties.
    • Civil works and sanitary finishes: Smooth, seamless walls, hermetic ceilings, sanitary coves, and radiological shielding.
    • Electromechanical installations: Emergency electrical systems, isolation panels, and adaptation of air conditioning (HVAC) networks with absolute filtration.

    When is it needed?

    A maintenance manager or medical director should schedule specialized interventions upon detecting the following signs in the infrastructure:

    1. Cracks or detachments in floors: Cracks in concrete or open joints that accumulate moisture, dirt, and bacteria.
    2. Observations by COFEPRIS: Non-conformities detected during audits by the Federal Commission for the Protection against Sanitary Risks.
    3. Electrostatic discharge failures: Loss of conductivity in operating room floors, endangering sensitive medical equipment and patient safety.
    4. Stains and degradation due to chemical agents: Premature wear of coatings due to constant use of hospital-grade disinfectants.
    5. Lack of airtightness in ducts and ceilings: Presence of dust or suspended particles in laminar flow or intensive care areas.
    6. Need for area reconversion: Modification of existing spaces to house new diagnostic equipment (X-rays, CT scanners, MRIs).

    Problems it solves

    • Nosocomial Infections: The elimination of joints and porosities through continuous epoxy floors prevents the proliferation of pathogens such as Pseudomonas aeruginosa y Staphylococcus aureus.
    • Sanctions and Closures: Ensures full compliance with COFEPRIS requirements and the Mexican standard NOM-016-SSA3-2012.
    • Prolonged Operational Downtime: We apply fast-curing technologies that allow the rehabilitation of corridors and emergency rooms in a matter of hours, avoiding the temporary closure of critical services.
    • Risks of Electrical Discharges: The correct installation of conductive floors and grounding systems dissipates destructive static and protects human life.

    Benefits for your Medical Institution

    • Certifiable Asepsis: 100% monolithic, easy-to-clean surfaces that withstand continuous cycles of high-pressure washing and aggressive chemical agents.
    • Regulatory Compliance: Guarantee of approval in federal and state health audits.
    • Extreme Durability: Systems designed to withstand constant traffic of stretchers, wheelchairs, personnel, and medication distribution carts.
    • Return on Investment (ROI): Drastic reduction in corrective maintenance costs and daily cleaning times.

    Types of Hospital Flooring Solutions and Systems

    SystemRecommended ThicknessChemical ResistanceCuring TimeRecommended Use
    Conductive / ESD Epoxy2.0 - 3.0 mmExcellent24 - 48 hoursOperating rooms, X-ray rooms, analytical laboratories
    Cementitious Urethane4.0 - 6.0 mmExtreme (Acids/Alkalis)12 - 24 hoursWashing areas, industrial kitchens, sterile warehouses
    Methyl Methacrylate (MMA)3.0 - 5.0 mmHigh1 - 2 hoursEmergency corridors, ambulance ramps, high-traffic areas
    Sanitary Epoxy Paint10 - 15 milsModerate24 hoursMachine rooms, technical corridors, supply warehouses

    Materials and Technologies Used

    At SINE México we don't improvise. We use chemical formulations from world-leading brands such as Sika, Sherwin-Williams (General Polymers), BASF (Master Builders Solutions) and Euclid Chemical:

    • Solvent-Free Epoxy Resins (100% Solids): They prevent the emission of volatile organic compounds (VOCs) during application, allowing work in adjacent areas without evacuating the hospital.
    • Silver Ion Antimicrobial Additives: Integrated into the polymer matrix to actively inhibit the growth of bacteria and fungi throughout the floor's lifespan.
    • Lead Shielding Systems: Calibrated lead sheets and high-density gypsum panels with barite for radiology rooms, installed under strict medical physics standards.

    Applicable Regulations and Standards

    Our interventions are executed under the strictest national and international regulatory framework:

    • NOM-016-SSA3-2012: Which establishes the minimum infrastructure and equipment characteristics for hospitals and specialized medical care clinics.
    • NOM-001-SEDE-2012: Electrical installation regulation, specifically Article 517 (Health Care Facilities).
    • NFPA 99: International standard for healthcare facilities (electrical safety, medical gases, and vacuum systems).
    • ISO 14644: Standards for cleanrooms and associated controlled environments (applicable to laboratories and laminar flow areas).

    Our Work Process (SINE)

    1. Field Diagnosis and Evaluation: Free technical inspection to evaluate the condition of the concrete substrate, humidity levels, and conductivity requirements.
    2. Specification Engineering: Selection of the optimal system (thickness, chemistry, and finish) according to the use of each area.
    3. Mechanical Substrate Preparation: Use of scarifiers and grinders with closed-circuit HEPA vacuum to ensure an adequate anchor profile (CSP 3 to 5 according to ICRI) without generating dust.
    4. System Application: Installation by certified technicians of the primer, base coat, integrated sanitary cove, wear layer, and final seal.
    5. Quality Control Tests: Measurement of electrical conductivity (in ESD systems) according to ASTM standards, pull-off adhesion tests, and thickness verification.
    6. Delivery and Acceptance Report: Delivery of a technical dossier including technical data sheets, material quality certificates, and a written warranty policy.

    Common Mistakes When Hiring / Installing

    • Skipping mechanical concrete preparation: Applying coatings on smooth concrete or concrete contaminated with oils guarantees premature detachment of the floor.
    • Not measuring substrate moisture: Trapped moisture generates osmotic pressure, creating bubbles and blisters in epoxy floors. At SINE, we measure moisture with precision equipment before application.
    • Ignoring the sanitary cove: Installing conventional wood or tile baseboards in critical areas accumulates dirt and violates COFEPRIS regulations.
    • Hiring uncertified personnel: The use of unqualified labor results in irregular thicknesses, loss of conductivity, and costly project delays.

    Factors Determining Cost

    The budget for a hospital maintenance or civil works project varies according to:

    • Total area in square meters: Higher volume, optimization of indirect costs.
    • Current condition of the substrate: Need for prior repairs, patching, leveling, or removal of previous coatings.
    • Time window for execution: Night work, weekend work, or ultra-fast curing modify logistics and material selection.
    • Specific technical requirements: Need for static dissipative properties (ESD), radiological shielding, or extreme chemical resistance.

    SINE Mexico Warranty

    All our maintenance and coating installation projects in the hospital sector come with a written warranty of up to 5 years (depending on the specified system). This warranty covers adhesion defects, failures in conductive properties, and wear resistance under normal operating conditions. We have the direct support of the world's leading resin manufacturers.


    Frequently Asked Questions

    What type of flooring is suitable for an operating room according to Mexican standards?

    For operating rooms and delivery rooms, a conductive or electrostatic dissipative (ESD) floor is required that complies with NOM-016-SSA3-2012. It must be a continuous, seamless epoxy system with an integrated sanitary cove and resistance to deep disinfection chemical agents such as chlorine, isopropyl alcohol, and hydrogen peroxide.

    How long must operations be stopped to apply an epoxy floor in a hospital corridor?

    Using fast-curing systems based on Methyl Methacrylate (MMA) or polyaspartic technologies, the area can be opened to heavy pedestrian and institutional traffic in just 2 to 4 hours after application, minimizing the impact on hospital operations.

    How do you guarantee dust containment during maintenance work in critical areas?

    We implement strict containment protocols using high-density plastic physical barriers (temporary isolation walls), air extractors with HEPA filters to create negative pressure, and grinding equipment with closed-circuit industrial vacuum systems to capture 99.9% of dust at the source.

    What regulations govern electrical installations in healthcare areas?

    We rigorously align with NOM-001-SEDE-2012 (Article 517) and the international standard NFPA 99, which dictate guidelines for essential electrical power systems, isolation panels, grounding systems, and surge suppression in critical patient care areas.


    Request a Quote

    Optimize the safety, aesthetics, and regulatory compliance of your hospital with the industrial and sanitary maintenance experts in northern Mexico.

    • WhatsApp: +52 871 228 3838
    • Email: ventas@sinemantenimiento.com
    • Offices and Branches: Torreón (Coahuila), Saltillo and Piedras Negras.
    • Web Contact: Visit our contact section at /quote section to schedule a free diagnostic technical visit at your facilities.

    Do you work in hospitals?

    Let's talk about your project. We know the standards and timelines of your industry.

    Request a Quote