Metal Structures

    SINE México's fabrication and assembly of metal structures is an engineering service for the fabrication and erection of structural steel for industrial buildings, pipe racks, mezzanines, and heavy-duty supports. We design and assemble under AISC and AWS standards to guarantee structural safety, optimize spaces, and support heavy machinery in northeastern Mexico.

    Fabrication and assembly of steel structures.

    What is the Metal Structures Service?

    Industrial welding fabrication and assembly of metal structures from SINE México is a comprehensive civil and mechanical engineering service that includes the design, fabrication, welding, anticorrosive protection, and on-site installation of structural steel elements. This service is designed to support the operational, dynamic, and environmental loads of heavy and manufacturing industries.

    Our projects include key elements such as:

    • Rigid frames and trusses for industrial buildings and warehouses.
    • Pipe racks for the safe conveyance of process fluids, steam, and gases.
    • Industrial mezzanines for optimizing vertical spaces and office or storage areas within the plant.
    • Special supports for hoppers, silos, cyclones, conveyors, and heavy machinery with constant vibration.
    • Operation platforms, walkways, and emergency stairs under industrial safety guidelines.

    When is this service needed?

    A plant or maintenance manager should consider the intervention of metal structure specialists when the following operational situations arise:

    • Expansion of production lines: Need to expand the covered area of the building or construct mezzanines to house new equipment.
    • Layout reconfiguration: Relocation of heavy machinery that requires new structural bases or overhead support frames.
    • Installation of new services: Assembly of process piping that requires the construction of pipe racks or pipe bridges between buildings.
    • Visible structural deterioration: Presence of severe corrosion, deformations due to forklift impact, or material fatigue in existing structures.
    • Compliance with safety regulations: Requirement for emergency stairs, walkways with guardrails, or maintenance platforms to comply with STPS inspections.

    Problems it solves

    • Risk of collapse or structural failure: We eliminate the danger of collapse due to overload or fatigue through precise structural calculations and certified welding.
    • Loss of usable space: We solve space saturation on the ground floor by designing and assembling high-capacity mezzanines.
    • Plant shutdowns due to deficient assemblies: We avoid delays in line startups through meticulous planning that minimizes field interferences.
    • Accelerated corrosion in aggressive environments: We solve the premature degradation of steel exposed to humidity, chemicals, or weather through surface preparation by sandblasting and high-performance industrial coatings.
    • Fines and closures: We ensure compliance with state and municipal structural safety and civil protection regulations.

    Benefits for your plant

    • Guaranteed structural safety: Designs backed by calculation reports signed by structural experts (D.R.O.) under AISC guidelines.
    • Optimization of Return on Investment (ROI): Structural steel allows for future modifications, simple expansions, and has a higher recovery value than concrete.
    • Operational continuity: We execute clean and fast installations that minimize downtime for your production lines.
    • Extended Durability: Structures protected with state-of-the-art coatings that reduce long-term preventive maintenance costs.
    • Total Traceability: We deliver a quality dossier that includes steel quality certificates, non-destructive testing (NDT) reports for welds, and paint thickness reports.

    Types of solutions and systems available

    Structure TypeMain ApplicationDesign StandardRecommended Connection TypeTypical Finish
    Industrial WarehousesWarehouses, manufacturing plants, distribution centers (CEDIS)AISC LRFD / CFE (Wind)Bolted (High strength A325)Alkyd primer + Enamel
    Load MezzaninesAssembly areas, vertical storageAISC / NOM-006-STPSMixed (Welded in shop / Bolted in field)High solids epoxy
    Pipe RacksChemical, food, automotive plantsAISC / ASME B31Bolted for easy expansionHot-dip galvanized or Polyurethane
    Platforms and WalkwaysSafe access to machinery and valvesOSHA 1910.25 / NOM-001-STPSWelded / Electroforged gratingGalvanized or High visibility paint
    Machinery SupportsHoppers, silos, presses, millsAISC (Dynamic analysis)Full penetration welding (AWS D1.1)Novolac epoxy (chemical resistance)

    Materials and technologies used

    At SINE México, we do not compromise on the quality of materials. Our standard specifications include:

    • Structural Steel: Commercial and industrial profiles in ASTM A36, ASTM A572 Grade 50, and ASTM A992 (IPR beams) grades, ensuring the required mechanical strength.
    • Connection Systems: High-strength ASTM A325 and A490 bolts, installed with a calibrated torque wrench to ensure design tension.
    • High-Quality Welding: Electrodes classified by AWS (E7018, ER70S-6) applied using SMAW, FCAW, or GMAW processes.
    • Protective Coatings: Alliances with leading manufacturers such as Sherwin-Williams y Carboline for the application of:
      • Zinc-rich primers (Zinc Rich Primers) for galvanic corrosion protection.
      • High-solids epoxy barriers for wet or wet process environments.
      • Intumescent paints for passive fire protection on columns and main beams.

    Applicable Regulations and Standards

    Our design, manufacturing, and assembly processes are governed by the strictest international and national standards:

    • AISC (American Institute of Steel Construction): Specifications for the design, fabrication, and erection of structural steel.
    • AWS D1.1 (Structural Welding Code - Steel): Welding procedure (WPS) and welder (WPQ) certification.
    • NOM-001-STPS-2008: Safety conditions in buildings, premises, facilities, and work center areas (ramps, stairs, platforms).
    • NOM-002-STPS-2010: Safety conditions - Fire prevention and protection in workplaces (application of fire retardants).
    • ASTM (American Society for Testing and Materials): Quality standards for steel materials and structural fasteners.

    Our work process (SINE)

    1. On-Site Survey and Diagnosis: Free technical visit to understand the project's load, space, and environmental conditions.
    2. Engineering and 3D Modeling: Preparation of detailed plans, structural calculation reports, and modeling in specialized software to avoid interferences in the field.
    3. Fabrication and Manufacturing in Workshop: Cutting, punching, and welding of structural elements in our controlled facilities, under strict quality control supervision.
    4. Surface Preparation and Painting: Mechanical cleaning or sandblast (SSPC-SP6 / SSPC-SP10) and application of the specified paint system.
    5. Logistics and On-Site Assembly: Safe transport of structures and assembly using certified cranes, personnel with DC-3 for work at heights, and controlled lifts.
    6. Quality Control and Delivery: Non-destructive testing (liquid penetrant or ultrasound on critical welds), final torqueing of connections, and delivery of quality dossier with "As-Built" plans and warranties.

    Common mistakes when hiring (And how SINE avoids them)

    • Hiring common metalworking shops for load-bearing structures: A common metalworking shop does not calculate deflections or have structural engineers. SINE designs under AISC standards and delivers calculation reports signed by structural experts.
    • Omitting surface preparation before painting: Applying paint over rust or mill scale guarantees that the coating will peel off in less than a year. SINE performs surface preparation under SSPC standards to ensure coating adhesion.
    • Unqualified welders: Welds with porosity or lack of penetration are prone to catastrophic failures under dynamic loads. All our welding personnel are qualified under the AWS D1.1 code.
    • Lack of lifting operation planning (Hoisting): Attempting to assemble heavy structures without a lifting plan puts personnel's lives and plant infrastructure at risk. At SINE, we perform a rigorous Rigging Plan for each critical crane maneuver.

    Factors that determine project cost

    The cost of a metal structures project is not calculated generically per square meter, but depends on real technical variables:

    • Total steel tonnage: The weight of steel required according to the structural design.
    • Design complexity: Structures with wide spans without intermediate columns require deeper beams and more complex connections.
    • Assembly site conditions: Assembly height, accessibility for heavy cranes, and whether the installation is performed outdoors or inside an active facility.
    • Coating specification: From a standard anti-corrosive primer to hot-dip galvanized systems or intumescent fire-resistant paints.
    • Project location: Transportation logistics and per diem for technical personnel to Torreón, Saltillo, Piedras Negras, or surrounding areas in the northeast.

    Request your quote

    Optimize your plant's space and ensure the safety of your operations with metal structures designed and assembled by experts.

    Schedule a free technical visit to your plant today for requirements gathering and a formal quote.

    Features

    • Structural calculation and design under AISC and LRFD standards
    • Welders qualified and certified under AWS D1.1 standard
    • Safe assembly with critical maneuvers and detailed lifting plans
    • Steel fabrication with quality control and heat traceability
    • Application of anticorrosive and intumescent paint systems (Sherwin-Williams)
    • Fabrication of mezzanines, pipe racks, industrial buildings, and special supports
    • Operational coverage in Torreón, Saltillo, Piedras Negras, and throughout the Northeast
    • On-site surveys and 3D modeling for zero field interferences

    Real Projects

    Construcción de bodega industrial exterior con lámina y estructura metálica
    Exterior industrial warehouse construction
    Portón industrial con cortina PVC en nave manufacturera
    Industrial gates and PVC curtains
    Trabajos en altura sobre estructura metálica de techo industrial
    Roof structure maintenance
    Muro de block gris divisorio dentro de planta industrial
    Industrial block partition walls
    Remodelación de oficinas y áreas comunes con tabla roca y plafón acústico
    Office remodeling with drywall
    Muro divisorio de tabla roca con ventanas terminado en nave industrial
    Drywall partition walls
    Remodelación de baños industriales con cancelería roja y lavabo corrido
    Industrial bathroom remodeling
    Baños industriales con mingitorios cerámicos y muro de piedra decorativa
    Bathrooms with premium finishes
    Baños corporativos remodelados con cancelería y muro de piedra
    Remodeled corporate bathrooms
    Soldadura MIG en estructura metálica dentro de centro de distribución
    MIG welding in distribution center
    Fabricación e instalación de jaulas de seguridad amarillas para racks
    Safety cages for industrial racks
    Pailería y barandal industrial amarillo en área de recibo
    Industrial boilermaking and railings
    Estructura metálica de mezzanine con techo tipo panel
    Mezzanine and metallic structures
    Rack móvil metálico para almacenamiento de herramentales
    Mobile racks for tools
    Herrería arquitectónica industrial fabricada por SINE
    Industrial and architectural ironwork

    Need a quote for metal structures?

    Response in less than 24 hours. No obligation.

    Get a Quote Now